The instrument is designed for the determination of cyanide, volatile phenol, anionic surfactant, ammonia nitrogen, chemical oxygen demand, sulfide, total phosphorus, total nitrogen, nitrate / nitrite, hexavalent chromium and other ingredients in surface water, groundwater, drinking water and environmental water.
-Fully automatic multi-channel analysis, the workstation software can run up to 8 channels simultaneously. The analysis method is easy and fast to change; the entire analysis process is completed automatically without manual operations; -Peristaltic pump: 12-channel integral gland peristaltic pump, pump speed can be programmed between 1-100 rpm; -Auto sampling system: polar-coordinate auto sampling system, with 162 positions for sample tube, cell for needle washing and 2 large cells for cleansing liquid, to meet the needs of large sample volume analysis; -Super long life-time LED light source up to tens of thousands of hours. High-sensitivity blue-light enhanced photo detector, and the wavelength range is 340nm-1050nm; -High-precision A/D converter, the detection dynamic range is not less than 3 orders; -Diluter: It can automatically make standard solutions for calibration curve and online dilution of out-of-range samples with a dilution factor of 1.5-10000 times; -Reagent dosage: 10ug-100ug depending on the method; -Response Time: each method is different, the fastest is 120 samples / hour.
Linear range: 0.01 -2mg / L (based on P); MDL: <0.005 mg / L (based on P); Response Time: 30 samples / hour; Precision: <1.0%; Note: the specifications will vary on the measured substances.